This site contains affiliate links to products, and we may receive a commission for purchases made through these links.
If you are having trouble with your MPOW headphones, don’t worry – I can help. In this blog post, I will walk you through the process of how to reset MPOW headphones. This is a simple process that only takes a few minutes to complete.
To rest your MPOW headphones, turn them off. Place them in their charging box. You’ll then need to press and hold the power button for about five seconds. You’ll see red and white, or blue and red lights blink. Release the power button. Go to your device and pair the headphones again. If prompted to enter a PIN, use 0000.
Continue reading and discover some tricks and hacks for getting the best listening experience with your MPOW headphones.
Why You May Need to Reset Your MPOW Headphones
Why do need to reset your MPOW headphones in the first place? Sometimes, headphones start misbehaving. Here are some of the common problems that may require resetting the headphones:
1. There is a software glitch
When you first start using your headphones, you may need to update the firmware. If there is a software glitch, it can be fixed by resetting the headphones. However, some software-related issues are better solved by updating the firmware.
2. The headphones are not connecting to the device
This is one of the most annoying problems – you cannot seem to get your headphones to connect properly. Usually, this issue is caused by a firmware problem. Resetting the headphones may fix the problem.
3. The audio quality is poor
If you are not getting the desired audio quality, resetting the headphones may help. This process can also help if you are experiencing sound distortion or static.
4. The headphones are not charging
If your headphones are not charging, the first thing you should do is reset them. This process may solve the problem and get your headphones up and running again.
However, note that there may be a mechanical or electrical error with the headphones, in which case they will need to be repaired.
5. The buttons are not working properly
If the buttons on your headphones are not working as they should, a reset may help.
6. The headphones keep disconnecting
You are enjoying a movie or music and suddenly your MPOW headphones start disconnecting. This is likely a firmware problem and resetting the headphones may help.
How to Reset MPOW Headphones: A Step by Step Guide
So, how do you actually reset your MPOW headphones? It’s very easy – just follow these simple steps:
Step 1: Turn off the headphones
If your headphones were connected to a device, be sure to disconnect them first. Then, turn off the headphones by holding the power button for a few seconds.
Step 2: Put the headphones in the charging box
Place your MPOW headphones in their charging box. Make sure they are facing down and that the charging pins are aligned correctly.
This is an important step as it may also help catch any other problems such as if there is a charging error leading to the headphones misbehaving.
Step 3: Press and hold the power button
Now, you will need to press and hold the power button for about five seconds. You will see red and white, or sometimes blue and red lights blink. Release the power button.
Step 4: Connect to your device again
Go to your device and pair the headphones again. Go to the Bluetooth setting on your device and turn Bluetooth on. Scan for devices and look for your MPOW headphones. If prompted to enter a PIN, use 0000.
Once connected, your MPOW headphones should be working properly.
If you have tried all of the steps above and are still experiencing problems with your MPOW headphones, it is best to contact customer service for further assistance.
You may also want to check the MPOW website for more information and troubleshooting tips.
Why Are My MPOW Headphones Unable to Connect?
Sometimes, the headphones will be discoverable but unable to connect. There are various reasons for this.
The most common one is that the headphones are already paired with another device. If this is the case, you will need to unpair the headphones from the old device before trying to connect them with your new one.
Another reason may be that there is a firmware problem. Resetting the headphones may fix the problem. However, upgrading or updating your firmware may be a better solution.
There may also be an issue with your device’s Bluetooth. To troubleshoot this, you can try disconnecting the headphones and reconnecting them, or you can try turning Bluetooth off and on again on your device.
Note also that, it is possible that your device is connected to a different type of MPOW headphones. Make sure that the model you are trying to connect is the same as the ones you are using.
Finally, there may be an issue with the charging box. If your headphones will not charge or if they keep disconnecting, try using a different charging cable or try a different USB port on your computer. You may also want to try a different charging box.
My MPOW Headphones Keep Cutting Out
I would advise trying to reset the headphones following the steps outlined above. If this does not help, look for one of the following issues:
The headphones are low on power: If the headphones are low on power, they may cut out. Make sure that the headphones are fully charged and try connecting them to your device again.
The distance between the headphones and the device is too great: If you are not within close range of the device, the connection may be lost. Try moving closer to the device.
There is too much interference: The connection may be lost if there is too much interference. Try turning off any other devices that may be interfering with the headphones and try connecting to your device again.
READ MORE! Do Microwaves Affect Bluetooth Signals?
The audio files are too large: The headphones can only handle a certain amount of data at once. If you are trying to play audio files that are too large, the headphones may cut out. Try playing smaller files instead.
I Cannot Hear Anything on My MPOW Headphones
If you are not able to hear anything on your MPOW headphones, there are a few things you can try:
Make sure that the volume is turned up on both your device and the headphones.
If you are using an iPhone or iPad, make sure that the side switch is in the correct position. If it is set to mute, the audio will not play through the headphones.
The audio may be turned off on your device: Go to your device’s settings and look for the sound or audio settings. Make sure that the headphones are listed as an output device.
I Cannot Find the MPOW Headphones in My Device’s Bluetooth Menu
If you cannot find the MPOW headphones in your device’s Bluetooth menu, there are a few things you can try:
Make sure that the Bluetooth is turned on. The headphones may be in pairing mode, but if Bluetooth is not turned on, they will not be detected.
Check that the headphones are in the range of your device. If you are too far away, the connection may be lost.
Make sure that the model of headphones you are trying to connect is the same as the ones you are using. Not all MPOW headphones are compatible with all devices.
The headphones may be in sleep mode. To wake them up, press the power button on the charging box. Reset the headphones if the problem persists.
Resetting your MPOW headphones is easy and may fix some common issues. Hopefully, the tips I have provided have been helpful. If you are still experiencing problems, please leave a comment below and I will do my best to help.